Motul 300V 5W40 Synthetic Racing Engine Oil 1L

Motul 300V Factory Line Off Racing 5W-40

MOTUL 300V POWER is an all-season racing engine oil based on E technology with high HTHS viscosity. Developed for racing engines which are used in a wide speed and temperature range. Particularly suitable for rally, GT and short-distance racing.

SPECIFICATIONS/STANDARDS:STANDARDS: Exceeds the existing motorsport standardsAPPLICATION: Rally, GT, short distance racing

ESTER Core TECHNOLOGY:MOTUL has been developing high-performance engine oils based on synthetic esters for several decades. The special selection of synthetic esters and combination with an innovative additive package form an extraordinary synergy. ESTER Core is the latest technological development stage and enables maximum engine performance without compromising on reliability and wear.

ADVANTAGES- Max. Oil film stability, optimum adhesion, high temperature resistance for optimum wear protection.- Very good cold starting properties. Optimum engine lubrication even at very low temperatures.- Special friction modifiers enable a significant reduction in frictional resistance in the engine and a reduction in the operating temperature.- Very high pressure absorption capacity guarantees maximum lubrication reliability even in extreme temperature ranges.- The ester base reduces the operating temperature. The ester base reduces the operating temperature by up to 10°C in the upper ranges and has very good adhesion to metallic surfaces.- The low viscosity SAE 5W-40 allows a very fast oil film build-up and has a performance-enhancing effect.- Minimal evaporation tendency, thus low oil consumption.- Extremely shear-resistant, stable oil pressure under all operating conditions.

RECOMMENDATIONS:Due to the 5W-40 viscosity, only a small amount of unburned fuel can be compensated. Miscible with mineral and synthetic engine oils. For optimum engine performance, however, mixing with other synthetic and mineral engine oils should be avoided. Oil change interval: according to the type of use and operating conditions.

PROPERTIES:Viscosity SAE J 300 5W-40Density at 20°C ASTM D 1298 0.860Viscosity at 100°C ASTM D 445 13.6 mm²/sViscosity at 40°C ASTM D 445 81.8 mm²/sViscosity index ASTM D 2270 174HTHS viscosity ASTM D 4741 4.1 mPa*sPour point ASTM D 97 -45°CFlash point ASTM D 92 230°CTBN ASTM D 2896 8.25 mg KOH/g

Manufacturer Nr.: OEM: 104134

EAN: 3374650247724