Motul 5100 4T 10W50 Semi-Synthetic Oil for High Performance

Motul 5100 4T 10W-50

MOTUL 5100 4T 10W50 is a 4-stroke multigrade oil for demanding motorcycle engines based on MOTUL- Technosynthesis? with high-quality ester components and special additives for gear lubrication. Exceeds the requirements of motorcycle manufacturers who prescribe the viscosity SAE 10W-50 for certain models. For high performance bikes, sport bikes, street bikes, trail, off road bikes, enduro, trial, quad, scooter, etc. with 4-stroke engines with or without integrated gearbox, wet or dry clutch. Also for engines that meet the Euro-2 or Euro-3 requirements.

SPECIFICATIONS/STANDARDS:STANDARDS: API SM / SL / SJ / SH / SGFZG damage load level = 14FLSRELEASES: JASO MA2 N° M033MOT113

JASO (Japanese Automobile Standards Organization) has developed its own standard for 4-stroke motorcycle engine oils, JASO T 903. The gradations MA, MA1 and MA2 facilitate the selection of motorcycle engine oils specifically designed for wet clutches. JASO MA2 stands for the highest friction values and thus for optimum clutch compatibility during gear changes, during the acceleration phase and also at consistently high speeds.

ADVANTAGES:- Ester components, in combination with the additive package, improve shear strength, wear protection and engine and transmission life. This is documented with the outstanding FZG (Forschungsstelle für Zahnräder und Getriebebau) test result of damage load stage =14 FLS (Failure Load Stage). The smaller the value e.g. 1 FLS the lower the wear protection, the higher the value e.g. >14 FLS the better the wear protection of the gearbox. This test can be used to determine whether an adequate lubricant film thickness between the gears ensures reliable functioning of the transmission.- Optimized content of sulfur and phosphorus ensure long-term functioning of catalytic converters.- Prevents corrosion and contamination in the engine.- For modern engine technology with wet clutch and transmission lubrication in the same oil bath. No clutch sticking and slipping.- The smooth-running viscosity enables rapid oiling even in the starting phase, reduces critical cold-start wear and is ideally suited for hydro tappets.

RECOMMENDATIONS AND NOTES:Change interval according to vehicle manufacturer's specifications or adjusted according to operating conditions. Before use, be sure to observe the manufacturer's service documents and recommendations!

PROPERTIES:Color (visual) brownishViscosity SAE J 300 10W-50Density at 20°C ASTM D 1298 0.873Viscosity at 100°C ASTM D 445 17.73 mm²/sViscosityt at 40°C ASTM D 445 118,3 mm²/sViscosity index ASTM D 2270 168Pour point ASTM D 97 -39°CFlash point ASTM D 92 218°CTBN ASTM D 2896 8,2 mg KOH/g

Manufacturer Nr.: Motul 104074

EAN: 3374650247144