Stable, classic side stand from Moto Nostra which is used as a replacement for the main stand or in combination with it. Sturdy 4mm base plate made of black matt powder coated steel.
The Moto Nostra side stand is not self-folding, so the scooter is always stable.
MOUNTING
Mounting is done under the mounting plates of the main stand. If the side stand is installed together with the main stand, use slightly longer screws (M6x25mm) if necessary. To remount the main stand spring we recommend a tension spring tool (see accessories).
TIP
Vehicles with 9 inch tires have a lower height at the bottom plate than the 10 inch models. Therefore the side stand may have to be shortened slightly for mounting on 9-inch models.
NOTE
Vehicles with registration plates (80-125ccm) pass the main inspection (HU), which is due every two years, only with an automatically folding side stand. Alternatively, however, a non-self-retracting side stand is permitted if the vehicle cannot be started with the side stand folded out (e.g. due to an interruption in ignition by means of a microswitch on the side stand).
AI-translation
