Steering Wheel Remote Control Adapter for Audi / Seat / Skoda / VW

Steering Wheel Remote Control Adapter for Audi / Seat / Skoda / VW

Steering wheel remote control adapter Audi / Seat / Skoda / VW Quadlock Fakra>DIN/ISO/Multilead

Retain the original steering wheel remote control functions when replacing the factory radio with a retrofit radio.

Depending on the vehicle equipment and the range of functions and software of the retrofit device, individual operating functions may be omitted or replaced by other functions.

Compare the adapter plugs shown with those in your vehicle and make sure that they match visually and technically.

Please also check whether one of the specified original factory radios was installed in your vehicle.

Before final installation, check the vehicle functions, vehicle settings and steering wheel remote control for proper functioning.

Note:

CAN bus

Connection: 40 pin Quadlock VAG connector > Article: 42cx25Connection: OEM steering wheel remote control > Article:42arc100Connection: OEM antenna Fakra(f) > DIN(m)/ISO(m)

Radio connection cable Pioneer AVH/DMH/SPH 2022> Retrofit devices additionally:LFB cable 42a/42cx401 > Pioneer AVH/DMH/SPH 2022> Jack > Article: 42arc1072

Check dip switch position for aftermarket device

CAN bus activation OEM sound system supported

Audi /Seat Exeo vehicles with Blaupunkt / Matsushita / Grundig Concert II / Symphony II / Chorus II 2-DIN OEM deviceAudi /Seat Exeo vehicles with Bosch BNS 5.0 monochrome OEM navigationAudi /Seat Exeo vehicles with RNS-E 16:9 OEM navigation

Audi /Seat Exeo vehicles with OEM sound system:LFB Audi vehicles/Seat Exeo Quadlock Amp 2/4 channel Cinch > 42a-1321-002LFB Audi vehicles/Seat Exeo Quadlock Amp 2/4 channel Pro > 42a-1321-006Active system adapter Audi/VW Quadlock MQS insert > Article: 13-1424-25

Skoda vehicles with Bolero / Stream OEM deviceVehicles Skoda with Amundson / Columbus OEM navigation

Vehicles without Technisat OEM device

Vehicles VW with RCD200 / RCD210 / RCD300 / RCD310 / RCD500 / RCD510 OEM deviceVW vehicles with RNS315 / RNS510 OEM navigation

VW vehicles without RCD320 OEM device with ISO plugs

VW vehicles with DynAudio OEM sound system:+12V amp remote chamber D(A) pin 11 gray with OEM device check by measuring before connecting

Vehicles VW Caravelle / Multivan / T5 Transporter / Touareg with OEM sound system:Active system adapter VW T5/Touareg Quadlock MQS insert > Part: 13-1424-26

Vehicles without 52 pin QuadlockAudi vehicles without MMI system

Diagnostic LED:flashing blue > CAN bus searchconstant blue > CAN bus activered > +12V ignition current active

Suitable for the following vehicles:

AudiAudi A1 (8X) 07/2010 - 04/2018*Audi A3 (8P) 05/2003 - 04/2005***Audi A3 (8P) 10/2004 - 04/2013***Audi A4 B6 (8E) 11/2000 - 10/2005***Audi A4 B7 (8E) 11/2004 - 02/2009***Audi A5 (8T/8F) 06/2007 - 10/2011***Audi A6 (C5/B4) 05/2001 - 03/2006***Audi Q3 (8U) 10/2011 - 11/2014*Audi Q3 (8U) 02/2015 - 06/2018***Audi Q5 (8R) 09/2008 - 05/2012***Audi Q5 (8R) 09/2012 - 01/2017***Audi R8 (42) 04/2007 - 05/2015***Audi TT (8J) 04/2006 - 04/2010***/*****Audi TT (8J) 08/2010 - 03/2014***/*****

SeatSeat Alhambra (7N) 10/2010 - 04/2015Seat Altea (5P) 06/2004 - 03/2009Seat Altea (5P) 04/2009 - 07/2015Seat Exeo (3R) 03/2009 - 05/2013***Seat Ibiza (6J) 06/2008 - 02/2012Seat Ibiza (6J) 03/2012 - 06/2015Seat Leon (1P) 09/2005 - 03/2009Seat Leon (1P) 04-2009 - 11/2012Seat Mii (AA) 12/2011 - 06/2019****Seat Toledo (5P) 01/2005 - 10/2009Seat Toledo (NH) 03/2013 - 05/2015

SkodaSkoda Citigo (AA) 06/2012 - 05/2017****Skoda Fabia (5J) 03/2007 - 04/2010Skoda Fabia (5J) 06/2010 - 06/2014Skoda Octavia (1Z) 06/2004 - 05/2009Skoda Octavia (1Z) 01/2009 - 03/2013Skoda Rapid (NH) 10/2012 - 04/2015Skoda Roomster (5J) 09/2006 - 04/2010Skoda Roomster (5J) 06/2010 - 02/2015Skoda Superb (3T) 07/2008 - 05/2013Skoda Superb (3T) 06/2013 - 05/2015Skoda Yeti (5L) 08/2009 - 10/2013

VW AMAROKVW Amarok (2H) 07/2010 - 08/2016VW Beetle (16) 11/2011 - 06/2016VW Caddy III (2K) 10/2003 - 08/2010VW Caddy III (2K) 09/2010 - 04/2015VW Caddy IV (DU) 06/2015 - 09/2020******VW Caravelle (7H) 10/2004 - 09/2009**VW Caravelle (7H) 09/2009 - 05/2015**VW CC (3C/35) 06/2008 - 11/2011VW CC (3C/35) 02/2012 - 08/2016VW Eos (1F) 05/2006 - 10/2010VW Eos (1F) 10/2010 - 04/2015VW Fox (5Z) 04/2005 - 06/2011VW Golf V (1K) 11/2003 - 09/2008VW Golf V (1KM) 06/2007 - 10/2009VW Golf V Plus (1KP) 01/2005 - 02/2009VW Golf VI (1K) 11/2008 - 09/2012VW Golf VI (1KM) 11/2009 - 04/2013VW Golf VI (1K) 06/2011 - 07/2016VW Golf VI Plus (1KP) 03/2009 - 01/2014VW Jetta III (1K5/1KM) 09/2005 - 10/2010VW Jetta IV (162) 01/2011 - 08/2014VW Multivan (7H) 10/2004 - 09/2009**VW Multivan (7H) 09/2009 - 05/2015**VW Passat B6 (3C2) 11/2005 - 07/2010VW Passat B6 (3C5) 08/2005 - 07/2010VW Passat B7 (3C/362) 11/2010 - 10/2014VW Phaeton (3D) 05/2007 - 05/2010VW Polo IV (9N) 03/2005 - 03/2009VW Polo V (6R) 06/2009 - 01/2014VW Scirocco III (13) 08/2008 - 04/2014VW Sharan II (7N) 08/2010 - 04/2015VW T5 Transporter (7H) 08/2003 - 09/2009**VW T5 Transporter (7H) 09/2009 - 05/2015**VW T6 (7HC) 07/2015 - 08/2019******VW Tiguan I (5N) 10/2007 - 02/2011VW Tiguan I (5N) 06/2011 - 04/2016VW Touareg I (7L) 06/2003 - 11/2006**VW Touareg I (7L) 11/2006 - 02/2010**VW Touran (1T) 01/2003 - 09/2006VW Touran (1T) 11/2006 - 04/2010VW Touran (1T) 08/2010 - 04/2015VW UP! (AA) 12/2011 - 06/2016****

The following signals are provided:

Reimport vehicles or vehicles with different software may be incompatible in terms of functions.

pink: +12V ignition terminal 15 1.5A max.orange: +12V lighting terminal 58 0.1A max.white: +12V reversing signal 1.5A max.yellow/green yellow/red: speed signalgray: Interface no functiongray: 40 Pin Quadlock Pin 11 +12 Amp Remote DynAudio OEM sound system

Steering wheel remote control

CAN bus activation OEM sound system supported

*Vehicles with Chorus OEM device with monochrome display**Vehicles with OEM sound system > Article: 13-1424-26***Vehicles with 2-DIN OEM device***Vehicles with OEM sound system > Article: 13-1424-25****Vehicles without OEM sound system*****OEM sound system CAN activation******Vehicles with Composition Audio MIB Entry OEM device with front AUX/SD/USB

Connection cable for the following radio manufacturers:

Multilead various devices > Article: 42arc100Alpine 3.5mm jack connection > Article: 42arc101Blaupunkt 2010> 3,5mm jack connection > Article: 42arc107Blaupunkt 2010> Key1 / Key2 / (GND) connector > Article: 42arc000China HU Key1 / Key2 / (GND) connector > Article: 42arc000Clarion 3.5mm jack connection > Article: 42arc104Digital Dynamics single cable connection > Article: 42arc108ESX Key1 / Key2 connection > Article: 42arc000JVC 3.5mm jack connection > Article: 42arc104JVC single cable connection > Article: 42arc105Kenwood single cable connection > Article: 42arc105Kenwood 2017> 3.5mm jack connection > Article: 42arc107Kenwood 2020> Key1 / Key2 / GND connection > Article: 42arc000Pioneer 3.5mm jack connection > Article: 42arc107Pioneer AVH/DMH/SPH 3.5mm jack connector > Article: 42arc1072Snooper Key1 / Key2 connection > Article: 42arc000Sony 3.5mm jack connection > Article: 42arc107XZent single cable connection > Article: 42arc108Zenec single cable connection > Article: 42arc108

General installation instructions:

Check:1: Check all operating functions and vehicle setting functions of the OEM device2: Disassembly of the OEM device without voltage3: Check all interface connections for correctness and continuity without voltage

Connection and connection sequence:1: De-energize the settings and hardware configuration of the interface2: Check the configuration of the radio connection cable3: Connect the radio connection cable according to the operating instructions for the retrofit device4: Connect all other connections according to the operating instructions for the retrofit device5: Connect the overall installation to the vehicle with live connection last6: Software configuration of the interface according to the instructions in the article text and in the BDA7: Configuration of the retrofit device according to the operating instructions for the retrofit device steering wheel remote control/camera/FSE/antenna phantom power and others8: Function test steering wheel remote control and vehicle

Changes to the hardware configuration of the interface and the radio connection cable:1: Make changes without voltage2: Connection after change see above 5 to 8

If the interface or the vehicle malfunctions:1: Reset to the OEM device2: Operate OEM device3: Establish CAN bus quiescence4: Check the hardware configuration of the interface5: Connection after CAN bus rest see above 5 to 8

Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for guidance and information purposes only for trained specialist personnel.

Additional connections, changes to the cable configuration of the wiring harness or the use of alternative connections or connection extensions:1: Connections and changes must only be carried out by trained specialist personnel2: Connections and modifications must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications before connection3: Connections and modifications must be checked for function and correctness before connection by measuring and comparing with the vehicle's cable assignment diagram4: Connections and modifications are carried out under your own responsibility without guarantee of function5: Connections and modifications are carried out under your own responsibility without guarantee of damage to the vehicle, the retrofit device or the interface6: Modifications to the pre-assembled wiring harness may invalidate the product warranty

Manufacturer Nr.: ACV

EAN: 4026724674835