EBC X/XC Series - Full floating brake discs for the front wheel
These brake discs replace many of the LS (left) / RS (right) brake discs and can be installed on both sides.
The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect, the braking power is increased even further.
The weight of the new ''X'' and ''XC'' series is further reduced by 5-10% due to the 6-rivet system with lightweight inner ring, which is again an improvement over conventional brake discs.
The new brake discs are equipped with EBC's unique and patented SD system, whose square rivets in the recesses of the brake disc allow unlimited expansion of the outer and inner ring under the heat generated during braking without affecting the riveted joint
Such degradation occurs when the brake disc heats up under heavy braking and the outer ring contacts the (normally round) rivets that separate the outer ring from the inner ring. The new EBC system prevents this problem, which causes 100% of brake disc defects caused by disc distortion and vibration.
What is the SD system? It is the new square rivet system from EBC. With this system, warping of the brake disc is completely prevented, the service life of the brake disc is increased and the consistency of the braking effect is improved.
Manufacturer Nr.: EBC MD856X
EAN: 5050953310324
| Technical Data: | |
|---|---|
| Outer Diameter | : 320 mm |
| Inner Diameter | : 52.2 mm |
| PCD | : 80 mm |
| Number of mounting bolts | : 5 |
| Bolt hole diameter | : 8.5 mm |
| Thickness | : 5 mm |
| Construction | : Floating |
| Manufacturer | : EBC |