EBC X/XC Series - Fully floating brake discs for the front wheel
These brake discs replace many of the LS (left) / RS (right) brake discs and can be fitted on both sides.
The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect, the braking force is increased even further.
The weight of the new ''X'' and ''XC'' series is reduced by a further 5-10% thanks to the 6-rivet system with lightweight inner ring, which in turn represents an improvement on conventional brake discs
The new brake discs are equipped with EBC's unique and patented SD system, whose square rivets in the recesses of the brake disc allow unrestricted expansion of the outer and inner ring under the heat generated during braking without impairing the riveted joint
Such an impairment occurs when the brake disk heats up due to heavy braking and the outer ring touches the (normally round) rivets that separate the outer ring from the inner ring. The new EBC system prevents this problem, which causes 100% of brake disc defects caused by disc distortion and vibration.
What is the SD system? It is the new square rivet system from EBC. This system completely prevents brake disc distortion, increases the service life of the brake disc and improves the durability of the braking effect.
Manufacturer Nr.: EBC MD679X
EAN: 5050953104909
| Technical Data: | |
|---|---|
| Outer Diameter | : 320 mm |
| Inner Diameter | : 78.2 mm |
| PCD | : 100 mm |
| Number of mounting bolts | : 5 |
| Bolt hole diameter | : 10.5 mm |
| Thickness | : 4.5 mm |
| Offset | : 17.8 mm |
| Construction | : Floating |
| Manufacturer | : EBC |