EBC X Series Brake Disc Stainless Steel 7601255

EBC X / XC Series - Full floating discs for the front wheel

These brake discs replace many of the LS (left) / RS (right) brake discs and can be installed on both sides.

The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect, the braking force is further increased.

The weight of the new series "X" and "XC" is reduced by a further 5-10% due to the 6-riveting system with a light-weight inner ring, which in turn means an improvement over conventional brake discs

The new brake discs are equipped with the unique and patented SD system from EBC, whose square rivets in the recesses of the brake disc under the heat generated during braking allow an unrestricted expansion of the outer and inner ring without affecting the rivet connection

Such an impairment occurs when the brake disk is heated by strong braking and the outer ring contacts the (usually round) rivets that separate the outer ring from the inner ring. With the new EBC system, this problem is avoided, which causes 100% of the brake disc defects caused by warping of the disc and vibrations.

What is the SD system? This is the new four-cornered riveting system from EBC. This system completely prevents distortion of the brake disc, increases the life of the brake disc, and improves the braking performance.

Manufacturer Nr.: EBC MD3003X

EAN: 5050953315725