Brake disc ebc MD4141X

EBC X / XC Series - Full floating discs for the front wheel

These brake discs replace many of the LS (left) / RS (right) brake discs and can be installed on both sides.

The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect, the braking force is further increased.

The weight of the new series '' X '' and '' XC '' is reduced by a further 5-10% due to the 6-rivet system with a light-weight inner ring, which in turn means an improvement over conventional brake discs

The new brake discs are equipped with EBC's unique and patented SD system, whose square rivets in the recesses of the brake disc under the heat generated during braking allow unrestricted expansion of the outer and inner rings without affecting the rivet connection

Such an impairment occurs when the brake disc is heated by strong braking and the outer ring touches the (normally round) rivets that separate the outer ring from the inner ring. The new EBC system prevents this problem, which causes 100% of the brake disc defects caused by warping of the disc and vibrations.

What is the SD system? This is the new four-point riveting system from EBC. This system completely prevents distortion of the brake disc, increases the life of the brake disc, and improves the braking performance.

Manufacturer Nr.: EBC MD4141X

EAN: 5050953315831