Motul Scooter Gear 85W-140
Specially developed for scooter and moped final drives exposed to high loads. Adapted packaging in the practical tube facilitates the application. Especially recommended for final drives of SYM scooters, MOTO GUZZI final drives, but also for all other gearboxes that require an oil in viscosity grade SAE 85W-140.
STANDARDS: API GL-4 / GL-5
- Very high lubricity to withstand frequent successive load changes e.g. stop & go at full speed in city traffic with low wear.
- Warm viscosity 140 provides outstanding oil film resistance at high temperatures and reduces gear noise.
- Very stable and resilient oil film under various driving conditions, at idle, under heavy acceleration and at full power.
- EP and anti-wear additives protect against wear and increase gearbox life at very high speeds (gear reduction) and under shock loads while driving (rear wheel locking).
- Excellent corrosion protection, aging protection, prevents foaming.
Oil change: To be adjusted according to the manufacturer's requirements and according to your own use.
Viscosity SAE J 306 85W-140
Density at 20°C ASTM D1298 0.904
Viscosity at 40°C ASTM D445 355.0 mm²/s
Viscosity at 100°C ASTM D445 25.0 mm²/s
Viscosity index ASTM D2270 100.0
Pour point ASTM D97 -19.0 °C / -2.0 °F
Flash point ASTM D92 208.0 °C / 406.0 °F
Manufacturer Nr.: Motul 110870
EAN: 3374650324876
In compliance with EC regulation No. 1272/2008 and its amendments.
May produce an allergic reaction (EUH208).
This mixture does not present a physical hazard. Refer to the recommendations regarding the other products present on the site.
This mixture does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use.
In compliance with EC regulation No. 1272/2008 and its amendments.
Additional labeling :
| Technical Data: | |
|---|---|
| Application | : Transmission |
| Viscosity | : 85W140 |
| Manufacturer | : Motul |
| Quality | : Mineral |
| API Specification | : GL4 GL5 |
| Container | : 0.175 Litre |