3 jaw replacement clutch with aluminum claws for Puch Maxi moped with 1-speed automatic E50 engine.
Reproduction clutch for moped with original engine power in good quality. Also replaces the 2-jaw clutch of the older models without adjustments. For tuned, performance-enhanced engines, we strongly recommend a racing clutches from our range.
OEM number for reference: 344.1.12.304.1
Assembly note:
First, set all adjustment screws flush with the clutch jaws. Then tighten each screw 2.5 turns. This achieves an almost optimal clutch engagement for a series engine. If an old crankshaft with spline and keyway is still present, the spline must be removed before installing the clutch. This was omitted from 1980 onwards anyway.
Reproduction clutch for moped with original engine power in good quality. Also replaces the 2-jaw clutch of the older models without adjustments. For tuned, performance-enhanced engines, we strongly recommend a racing clutches from our range.
OEM number for reference: 344.1.12.304.1
Assembly note:
First, set all adjustment screws flush with the clutch jaws. Then tighten each screw 2.5 turns. This achieves an almost optimal clutch engagement for a series engine. If an old crankshaft with spline and keyway is still present, the spline must be removed before installing the clutch. This was omitted from 1980 onwards anyway.
