17t Hydraulic Cylinder for: Drive Shafts, Wheel Hubs

17t Hydraulic Cylinder for: Drive Shafts, Wheel Hubs

Gedore Automotive hydraulic cylinder 17t.

• In conjunction with the various KLANN tools, the hydraulic cylinder (17 t.) can be used to remove and install drive shafts, wheel hubs, wheel bearings, silentblocs and suspension joints.
• Due to its special design as a hollow piston cylinder and in conjunction with the various spindles, the hydraulic cylinder is suitable for pulling and pushing.

Note: A hydraulic pump is required to drive the hydraulic cylinder KL-0040-2500.

Technical data:

Permissible force max.: 170 kN (17 t)Stroke max.: 45 mm Oil pressure max.: 700 bar Oil volume max.122 cm3Piston area: 27 cm2Thread in hollow piston: M20Mounting thread on pressure side: 2 1/4 inch-14 UNSMounting thread on pull side: M42x2Cylinder outside diameter: 80 mmCylinder height retracted: 202 mmCylinder height piston extended: 247 mmConnection thread for hydraulic coupling: 3/8 inch NPTWeight: 5.2 kg

Scope of delivery:

1x hydraulic cylinder KL-0040-2500

consisting of:

KL-0040-2501 HousingKL-0040-2502 PistonKL-0040-2503 Inner tubeKL-0040-2504 Threaded ringKL-0040-2505 AdapterKL-0040-2506 Compression springKL-0040-2507 Sealing ring d 65 mmKL-0040-2508 Sealing ringd 36 mmKL-0040-2509 Circlip SB68KL-0040-2511 Cheese head screw M8 x 16KL-0040-2515 Protective cap d 42 mmKL-0040-2516 Protective cap d 57 mmKL-0040-2517 Blanking plug for 3/8 inch NPTKL-0040-2518 "Attention" label

Manufacturer Nr.: Gedore Automotive KL-0040-2500

EAN: 4046459002697