Circlip Pliers Set for Driveshaft Joints

Circlip Pliers Set for Driveshaft Joints

Hazet circlip pliers set

Application:Professional, centered insertion of the circlip,

e.g. when mounting the joint on the drive shaft

Easier, damage-free installation of the drive shaft joint:

Damage to the splines of the joint and shaft is prevented when fitting the drive shaft joint

drive shaft joint with an internal retaining ring.Easy fixing of the locking pliers over the retaining ring.The pliers slide down automatically when the joint is opened.Safe working without damaging the bellows.Suitable for drive shafts from all manufacturers.One-handed operation of the pliers, no other auxiliary tools required.

A tip for the application:

Insert the appropriate half-shells into the pliers depending on the shaft diameter.Place the pliers on the spline with pre-assembled retaining ring and clamp.Pre-positioning of the joint thanks to the conical shape of the pliers enables

easier insertion of the spline without damaging it.Can be used for almost all standard vehicles approved in Europe.

Made in Germany

Scope of delivery:

Number of tools: 15

1 circlip pliers 1847-122 half-shells 1847-121/2 (∅ 19.0 mm)2 half-shells 1847-122/2 (∅ 21.4 mm)2 half-shells 1847-123/2 (∅ 22.3 - 23.0 mm)2 half-shells 1847-124/2 (∅ 23.8 - 24.6mm)2 half-shells 1847-125/2 (∅ 26.2 - 26.9 mm)2 half-shells 1847-126/2 (∅ 28.5 - 29.2 mm)2 half-shells 1847-127/2 (∅ 30.0 mm)Smart Case (1/3) 165-LSafety insert system, 2-component soft foam insert. Insert also suitable for HAZET-Assistent

Manufacturer Nr.: Hazet 1847-12/15

EAN: 4000896221288