Abziehersatz 2-Arm

Kukko puller set, 2-armed, 2-piece

2-armed sepcial extractor for bearing inner rings on the front wheel hubs at Audi / VW, with adapter for attachment to hollow shafts:

• The puller with a VAG adapter (VAG V10.1) is particularly suitable for the cases where the wheel bearing falls apart on the front axle, during disassembly, and only the inner ring remains stuck on the axle

• Particularly on vehicles such as the VW Golf IV with riveted ABS rotor (wheel hub 1JO407613G), this puller provides excellent service

• The adapter ensures a flush support and with the aid of the lateral clamping clamp (from the second puller use), the sharp-edged pull-off hooks are pressed against the inner ring

• As a result, the ring deforms to such an extent that it is possible to pull off easily and safely

• The tensioning clamp (used by the second puller) presses the pull-off hook firmly to the part to be peeled off

Technical specifications:

Hexagon: 22 mm

Weight: 2.0 kg

AND

2-arm separator "COBRA" (series 210) with reversible pull-off hook and lateral clamp

• Can be used for many purposes where normal pullers can not be used.

• For loosening flushly seated parts such as axle bearings, ball bearing rings, pinions, etc.

• The retraction hooks are reversible and can be used on both sides, with different hooks - One side has normal pulling claws, the other separating claws

• The separating claws of the pull-off hooks engage the part to be peeled off when the lateral tensioning clamps are tightened and snap this before the actual peeling operation

• The multi-hole in the pull-off hook enables working with variable clamping depth

• The clamping clamp firmly presses the pull-off hooks onto the part to be peeled off

Technical specifications:

Wingspan: 95 mm (3 3/4 ")

Clamping depth: 170 mm (6 3/4 ")

Hexagon: 22 mm

Power max .: 5 to / 100 Nm

Weight: 2.60 kg

Delivery:

• 2-armed sepcial puller for bearing inner rings

• 2-arm separating puller "COBRA"

• 1 wrench for the spindle and ferrule

• 1 hexagonal screwdriver with T-handle for mounting the ferrule

• 1 tube of spindle dowel

• 1 Kukko chip

Manufacturer Nr.: Kukko K-204-V-210-1

EAN: 4021176100536