3M Epoxy Solder Replacement Spacht for Vehicles

3M epoxy resin tin replacement filler

Use temperature: 10-40°C

Optimum use temperature: 15-35°C

Working time: 15-20 minutes at 22°C

Sanding time: 4 hours at 22°C or 10-20 minutes at 70°C object temperature (IR drying)

Instructions for use: Best drying is achieved by heating the substrate to approx.30°C before applying the material, especially at

low ambient temperatures.

• Can be sanded after 20 minutes with forced drying.
• Air drying 4 hours (depending on layer thickness and at room temperature of 22°C)
• Lead and solvent free product
• Cold application, no open flame required
• Very good sandability as well as excellent corrosion protection
• Significant reduction in body repair time, due to fast drying tin substitute and consequent cost reduction
• Provides a professional high quality repair
• The fast-drying epoxy resin tin replacement filler is suitable for repairing surface damage, in the form of dents, deformations or parts that have been welded in place
• For steel, zinc and aluminum surfaces

Content: 180 ml

Manufacturer Nr.: 3M 37455

EAN: 4064035040871

Signal word: Warning

Hazard statements (H-phrases)

H315: Causes skin irritation.

H319: Causes serious eye irritation.

H317: May cause an allergic skin reaction.

H411: Toxic to aquatic life with long lasting effects.

Safety statements (P-phrases)

Prevention

P273: Avoid release to the environment.

P280E: Wear protective gloves.

Reaction

P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.

P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.

P391: Collect spillage.

Additional information

7% of the mixture consists of one or more components of unknown acute oral toxicity.

Contains 11% components of unknown aquatic hazard.