Sonax 4-Piece CERAMIC COATING - Long-lasting Protection for Car Paint

Sonax 4-Piece CERAMIC COATING - Long-lasting Protection for Car Paint

PROFILINE CeramicCoating CC One

• SONAX PROFILINE CERAMICCOATING CC One is a long-term protection for car paint, based on the latest Si-Carbon technology.
• This sealant can be applied in just one step and protects for up to 3 years.
• Gives the paint an intensive color depth and a dirt-repellent, soft waxy surface.
• The coating is particularly user-friendly and time-efficient, making it an ideal choice for beginners who have not yet gained extensive experience with ceramic coatings.
• Set with 2 application sponges and instructions for use.

Product application

• Ensure good ventilation during application.
• Application temperature from +10°C.
• Optimum application temperature 20 to 30°C.
• Take care when refinishing: Check paint fastness beforehand.
• Clean the paintwork thoroughly and polish to a scratch-free and hologram-free deep shine using a polishing machine as required.
• Immediately before sealing, the surfaces must be absolutely clean.
• To do this, spray SONAX PROFILINE Prepare (02373000) onto a soft touch microfiber cloth (04510000) and carefully wipe all surfaces to be treated.
• Dispense a few drops of CC One onto the light side of an application pad and apply it thinly to the paintwork in a crosswise motion.
• The area to be treated should be about half a square meter (1/4 hood).
• After a short exposure time of approx. 3 to 5 minutes, wipe off excess product streak-free with a new SONAX MicrofiberTuch soft touch (04510000) or SONAX Coating Towel (04511000).
• If the applicator starts to harden during the application of CC One, use a new pad.
• Treat the entire vehicle in this way and then allow the coating to harden for at least 4 hours.
• During this time, the vehicle must be kept in a clean and dry environment and the surfaces must not be touched.
• The contents of the can are sufficient for one application.
• Do not apply the product to hot surfaces and do not allow it to dry.
• Do not wash the vehicle within the first 7 days after sealing.
• Important: do not use highly alkaline cleaners, as these can attack the protective layer.
• PLEASE NOTE: Ensure good ventilation during application.

Contents: 4-piece set

Manufacturer Nr.: Sonax 02678410

EAN: 4064700267848

Signal Word Warning

Hazard Statements

• H226 Flammable liquid and vapor.
• H319 Causes serious eye irritation.
• H412 Harmful to aquatic life with long-lasting effects.

Precautionary Statements

• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
• No smoking.
• P260 Do not breathe vapors.
• P264 Wash thoroughly after handling.
• P271 Use only outdoors or in a well-ventilated area.
• P280 Wear eye protection.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313 If eye irritation persists: Get medical advice/attention.
• P403+P235 Store in a well-ventilated place. Keep cool.
• P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Labeling of packages with contents not exceeding 125 ml

Labeling of containers <125 ml differs. Reduced labeling according to Art. 29 and Annex I, No. 1.5 CLP Regulation is applied.

Product hydrolyzes to form methanol (CAS No. 67-56-1). Methanol is toxic by inhalation, swallowing, and in contact with skin. Methanol causes organ damage. Methanol is highly flammable.

Product hydrolyzes to form ethanol (CAS No. 64-17-5). Ethanol is classified for physical hazards and health hazards.

Inhalation of aerosol mists may cause health damage. Avoid breathing dust/fume/gas/mist/vapor/aerosol.