SONAX PROFILINE CeramicCoating CC Evo is a professional two-component coating for paintwork.
The set contains the two sealing products SONAX PROFILINE CeramicCoating CC Evo BaseCoat and SONAX PROFILINE CeramicCoating CC EvoGlossCoat in the latest formula generation, as well as four applicators.
Thanks to the new formulations, durability has been improved even further without having to compromise on processing.
For up to 5 years of protection.
CC Evo is the premium coating from SONAX with the best resistance and outstanding optical and haptic properties.
Product application
Ensure good ventilation during application.
Application temperature from +10°C. Optimum application temperature 20 to 30°C.
Caution with refinishing: Check paint fastness beforehand. After polishing the paint, spray SONAX PREPARE (02373000) as a basic cleaner into a soft touch microfiber cloth, wipe the paint with it and prepare it for coating.
CC Evo is then applied in two stages.
In the first sealing step, BASECOAT Evo is applied thinly to partial areas using an applicator sponge.
After a short flash-off time, the excess product is wiped off with a Coating Towel (0451100) before a new partial surface is treated.
After a waiting time of 1 hour, GLOSSCOAT Evo is applied thinly in a second step using a new applicator sponge.
The flash-off time here should be between 3 and 5 minutes.
The excess product is then removed with a SONAX Coating Towel (04511000).
If the product begins to harden in the sponge on large vehicles, a new applicator sponge should be used.
The fully treated vehicle must be left to dry for at least 4 hours and must not get wet during this time.
Ideally, the vehicle should be left in a room overnight.
Do not apply to hot surfaces and do not allow to dry.
The first vehicle wash should be carried out after 1 week at the earliest.
Important: Do not use highly alkaline cleaners, as these can attack the protective coating.