METALLPASTE 739G Teroson

Metal Paste for Repairs - Teroson UP 130

TEROSON UP 130 sealing spatula

• Universal scraper for emergency repairs, resistant to oil, water, the most common chemicals and high temperatures
• Suitable for the following repairs: gas tanks, radiators, concrete, casings & castings and many others
• Suitable for the following surfaces: steel, aluminum, galvanized steel, glass fiber, copper and tin

Mixture (component A + B)

Mixing ratio 100: 2-3

Dripping time (20 ° C, 50% rh) 4.5 min.

Sandability after 15 to 20 min.

preparation

• The surface to be filled must be free of grease, clean and dry
• In case of rust, it must be removed and then the corresponding
• Sand the repair area with 120 grit sanding paper
• The paint around the repair site need not be removed as soon as the existing paint has good adhesion
• It is recommended to clean and pretreat the repair site with TEROSON VR 20 before the next operation

PROCESSING

• Mix the putty in volume ratio (polyester resin to hardener TEROSON UP 190) Golf ball size (40mL) to pea size 4 to 5 cm (2 to 3%) until a homogeneously mixed mass is reached
• After mixing, the dripping time is about 4.5 minutes at 20 ° C
• Apply mixed putty to the repair site so that dents, scratches or surface irregularities are completely filled
• Higher layer thicknesses should be built up to avoid cracks in several operations
• The putty can be sanded at room temperature after 15 to 20 minutes. Accelerated curing by heat is possible 10 minutes after application (at a maximum of 60 ° C by IR lamps or in the oven)

Content: 739 g

Manufacturer Nr.: Teroson 2268385

EAN: 4058093014912