- Details
- Downloads
BODBESCH 4.5KG M HARDENER
Product Name: BODBESCH 4.5KG M HARDENER RELAFLOOR 3470
Description:
Feycolor Relafloor 347 2K PU Floor Coating with Hardener is a high-quality coloured UV-resistant floor coating designed for both interior and exterior applications on concrete, cement coatings, asphalt, and primed metals such as steel, galvanised steel, or aluminium.
- Highly abrasion-resistant
- UV-resistant
- Good alkali and acid resistance
- Fast drying
- Low solvent emissions
- Universally applicable
Technical Data:
- Mixing Ratio A:B: 8:1
- Yield: 0.2 - 0.4 kg/m²
Processing Instructions:
Recommended primer for metals: FEYCOPOX 510
System Build-Up for Slip Resistance R10: Add 15% RELAFLOOR 9910 anti-slip additive fine to RELAFLOOR 3470 and mix with a slow-running electric stirrer (approx. 300-400 rpm). Apply the mixed material (0.6 - 0.8 kg/m²) with a solvent-resistant short floor roller.
System Build-Up for Slip Resistance R12: Apply 0.6 - 0.8 kg/m² of RELAFLOOR 3470 with a solvent-resistant short pile roller. Then sand the surface with quartz sand (grain size 0.3 - 0.8) at a rate of approx. 2.5 - 3 kg/m². Remove the excess sand the next day and seal the surface again with RELAFLOOR 3470 (0.5 - 0.7 kg/m²).
Colour: RAL 7035 (light grey)
Contents: 4.5 kg
Manufacturer Nr.: Feycolor
EAN: 4049786004341
Signal word Warning
Hazard statements
- H226 Flammable liquid and vapor.
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
- H373 May cause damage to organs through prolonged or repeated exposure.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P241 Use explosion-proof electrical equipment.
- P273 Avoid release to the environment.
- P280 Wear protective gloves/protective clothing/eye protection/face protection.
- P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
- P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P308 + P313 IF exposed or concerned: Get medical advice/attention.
- P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
- P501 Dispose of contents/container to an industrial incinerator.
Hazard components for labelling
- Xylene
Supplemental Hazard information (EU)
EUH208 Contains 2-Propenoic acid, 2-methyl-, 2-(dimethylamino)ethyl ester, polymer with butyl 2-propenoate; fatty acids, C18-unsat., dimers, reaction products with N,N-dimethyl-1,3-propanediamine and 1,3-propanediamine; cobalt bis(2-ethylhexanoate); 2-butanone oxime. May cause an allergic reaction.
Other hazards
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, Annex XIII.
Motorradteile & Motorrad Ersatzteile © 2026 | Template © 2009-2026 by modified eCommerce Shopsoftware